Featuring an inbuilt compartment to hold parts of varying diameter, and with twice as many diameters to choose from you’ll be glad of the extra space.
The Revolver V2 can make coils in six sizes: 1.0/1.5/2.0/2.5/3.0/3.5mm; using Kanthal wire of 20, 22, 24, 26, 28, 30, or 32 gauge.
With this great little tool, you can build perfect coils every time – all with just a twist of the wrist!
Comes complete in a pull-cord leather effect carry case.
Insert the socket screw into the appropriate hole of the winder section
Insert wire through hole on the side of the handle. Leave about 1/2" of the wire protruding from the hole. Hold the end of the wire against the handle so it won't pull through. Pull the loose end of the wire around the shaft.
Slide the winder section over the shaft with the pin facing toward the handle. Turn the winder section so that it catches the wire and starts wrapping it around the shaft. Keep light pressure against handle while winding.
When finished, remove winder and straighten the wire end that protrudes from the hole in the handle.
Push up on the wire to slide coil up. Carefully grab the coil at the bottom to slide it off the shaft.